STP Formuła do czyszczenia wtryskiwaczy diesla Test

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=w_oXYknaZJ8

Subscribe to: https://www.youtube.com/c/PiotrTester... • Fuel system cleaning additive test - STP Diesel injector cleaning formula • Product characteristics • Cleans dirty injectors. Restores engine performance and efficiency. Helps to balance the idling speed. Fully safe for all classic and modern diesel engines, including injectors, DI, IDI and common rail engines. For use with conventional fuels and biodiesel. • #stp #dieselinjectors #diesel • How did the contaminated oil in the test tube develop? • It is a used mineral oil from diesel in which I dissolved the product. The oil was then heated until it ignited. This procedure was repeated 5 times. In addition, I added lithium grease, ceramic grease, motodoctor and MoS2 additive. The resulting oil is difficult to wash away. • In each sample there is up to 50ml of contaminated oil (I have a large supply). The oil is distributed throughout the entire sample. Then the sample is tested on a closed-circuit machine - at the end there is an injection rinse / injector (description in the film). Operating time of the machine 1 minute. • It then evaluates the condition of the tube. The speed at which the tested fuel additive cleans the tube should also be evaluated. • • Piotr Tester summary: • https://uszlachetniacze.blogspot.com/... • Translated with www.DeepL.com/Translator

#############################

New on site