地坪漆

YOUR LINK HERE:

http://youtube.com/watch?v=whayG9lMdBc

504.The complete version of the solidification floor construction process first involves polishing the equipment, installing diamond cutting heads, and tightening the dust cover to avoid excessive dust during polishing. Push the equipment to the designated position for the first ground trial polishing. Because there are many scratches on the ground, it is necessary to accurately locate the grinding depth, clean the surface with water, determine the grinding plan, and start horizontal repeated grinding after debugging is completed. • Bag and transport the polished dust away, install the water grinding blade, conduct a comprehensive water grinding, clean the ground mud with a water pusher, and repair the ground expansion joint to avoid affecting the closing. After the ground is completely dry, spread the curing agent material on the ground, which is used to infiltrate the ground and cement production. • Chemical reaction improves the hardness of the ground, and the water film equipment comprehensively polishes the surface, followed by resin film polishing. The polishing solution is mixed and evenly sprayed on the ground. After drying, the resin polishing film is installed. • Perform comprehensive polishing, this is the final effect, bright and non slip, wear-resistant and flat. Do you understand?#Floorpaint #epoxyfloorpaint • If necessary, you can contact us to obtain samples.

#############################

New on site