Wiring Ethernet Extensions How to Fit Sockets amp Make Patch Leads

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=wog0hDq4xTY

This video details the necessary steps to make a swaged (or crimped) cable railing connection. • Steps completed before filming: • 1. Doing one section at a time, measure overall length from outside face of beginning post to outside face of ending post, then add an extra 3”. • 2. Using the measurement from step 1, unroll cable and cut to length. • Steps demonstrated in video: • 3. Attach either a Field Tensioner or a Field Terminal to one end of the cable using the Crimper. • 4. Push the crimped fitting through the drilled hole of the beginning post and secure with hardware. • 5. Lace the raw cut end of the cable through all intermediate posts. • 6. Determine final cut length of cable and cut it. Attach second end fitting and secure with hardware. • 7. Tension the cable, remove the excess threading and finish attaching end hardware. • 8. Passivate the cables and other exposed stainless steel surfaces to keep them clean and protected from corrosion. • For more detailed instructions, reference FIELD SWAGED ASSEMBLY INSTRUCTIONS: http://stainlesscablerailing.com/fiel... • Stainless Cable Railing Inc. offers free estimates for cable railing systems. Call 888-686-7245 M-F 8-5 PST or visit our Estimate Request Page: http://stainlesscablerailing.com/binw...

#############################

New on site