HOW TO PROGRAMM A 2007 FORD F150 REMOTE FOB MANUALLY

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ww5FI4EpC4c

Ford F-150 2004-2016 - How to duplicate key or program new key. • How to duplicate key or program key for my Ford F-150 2011 XLT 5.0 V8 (2 wheel drive). • • How to program remote • 1, Close all doors then open drivers door press unlock button on drivers door while door is open. Insert key into ignition. Keep foot off brake pedal. • 2, Turn ignition from OFF to Run 8 times ending in Run ( Do not start the car, run position is just before the vehicle will start OFF is turned all the way back when the key can be removed from the ignition). • Must be performed within 10 seconds. Locks will cycle signaling entering into programming mode. • 3, Press any button on the remote being programmed, locks cycle confirming programming. Repeat this step for any addition remote. • 4, Turn key to OFF, locks will cycle to end programming mode. • How to program key chip • Make sure you have to have 2 working key • 1, Insert 1st working Key into ignition and turn to run (do not start engine) keep it 5 to 10 seconds to automatic program, then remove 1st key. Insert 2nd working key into the ignition and turn to run(do not start engine) keep it 5 to 10 seconds and remove the key, next insert the new key into ignition and turn to run and keep it like that 20 seconds to program the new key automatic. • Finish.... • • Ford F-150 2004-2016 - How to duplica...

#############################

New on site