How to Fix Your Garage Door Remote in 10 Seconds

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=x24WQU0n-Nw

Garage door remote not working? Don't take it to the repairs just yet...try this first! Some older models require you to change the frequency by changing the door code. If it doesn't work the first time, keep changing it until it works! • ATA Securacode • https://www.ata-aust.com.au/AtaAust/m... • CODING TRANSMITTERS • 15 • STEP 19 - SETTING THE TRANSMITTER TO • OPERATE THE COURTESY LIGHT • The transmitter can be programmed to operate the courtesy • light on the door opener. • 1. Press and hold Light Code button. • 2. Press the button on the transmitter you would like to use to • switch on the light for two seconds • 3. Pause for two seconds. Press the same button again on the • transmitter for two seconds. • 4. Release all buttons to store the transmitter in memory. • 5. Press the transmitter button to test if it switches on the light. • 19.1. ADJUSTIING COURTESY LIGHT TIME • The preset courtesy light time on the Door Opener is 3 minutes. • This time can be changed as below. • 1. Press and hold the Auto Close Time and Force Margin Set • buttons together . • 2. While holding the two buttons, press the green Open • button . Each press will add 10 seconds to the light • time. • 3. To decrease the time follow step 1 and press the red Close • button . Each press will deduct 10 seconds from the • light time. • 4. To recall the factory set default light time press and hold the • Auto Close Time, Force Margin Set and Reset buttons • together for about 2 seconds. • 20. DELETING PROGRAMMED CODES • 20.1 DELETING A STORED TRANSMITTER CODE • 1. Select the transmitter you want to delete. • 2. Press and hold the Door Code button • 3. Press the transmitter button you would like to delete for two • seconds. • 4. Pause for two seconds. Press the transmitter button again for • two seconds. • 5. Release the Door Code button. The code should now be • deleted. Confirm this by pressing the transmitter button, the • door should not respond. • 20.2 DELETING ALL STORED TRANSMITTER • CODES • 1. Turn the power off to the opener. • 2. Press and hold the Door Code button • 3. Turn the power on again, while holding the Door Code • button. Release Door Code when the Coding LED illuminates. • 4. All the stored codes including the courtesy light codes • should now be deleted. Confirm this by pressing the • transmitters previously used to operate the door. The door (and • light) should not respond. • • • #productreview #review #productreviewer #reviews #producttester • #producttesting #amazonreviewer #reviewer #amazon #productreviews #amazonfreebies #amazondeals #influencer #freestuff #free #amazonprime #blogger #freebies #amazonreview #reviewers #amazonus #giveaway #freeproducts #coupons #howto #diy #tutorial #youtube #tips #art #love #video #handmade #doityourself #instagood #motivation #creative #youtuber #craft #design #howtoperfect #howtomake #technology #learn #tipsandtricks #food #homemade

#############################

New on site