Banner K30 amp K50 Pro Indicator Lights

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=x2S6t8jkjws

In this video, Brad Vorrie introduces us to the K30 and K50 Pro by Banner Engineering. • The new Banner Engineering K50 or K30 Programmable Multicolor Indicator allows end users and OEM's to install one light in multiple application, without the need to stock multiple part numbers. The K50 and K30 Pro feature 7 available programmable colors with several animation options. Some other features include a translucent polycarbonate dome for daylight visible indication, IP69 UL Type 4X, 13 design, and an integrated audible alarm option available. • What makes this device special is the Banner Pro Editor software that allows you to create custom configurations based on the 5 pin M12 QD input connection. Let see how this is accomplished. • First be sure you have purchased the programming cable p/n: MQDC-506-USB. This is required to interface your PC with your light. If you wish to preview your colors and animations while you are programming, it is recommended to purchase a splitter cable and external power supply which is also available from Banner. • Next, go to Banner's Website and download the Pro Editor Software. Once the software is installed, be sure to install the driver for the programming cable. Most Windows 10 PC's can install the driver automatically without issue. However, if you have a Windows 7 PC or issues with windows 10 you will need to install the driver manually. To do this, download the driver, which is included in the software download. Next, go to your Control Panel and open device manager. The cable will be listed under other devices and should be listed as Communications Translator. Right click and select update driver software. click browse my computer for driver software. Then, let me pick from a list of device drivers on my computer and select show all devices. Click have disk. Click Browse and select the driver file. Click Ok. Click on EZ-Tool and press next. A warning may display saying that the driver is unsigned, click yes. Finally, note the com port that windows assigned to the driver under ports in device manager. • Do note that if you simply wish to download settings with limited preview, you can plug the programming cable directly to the light and USB into your computer. However, if you want to preview your colors and animations with full capabilities, be sure you are using a splitter cable. One end of the splitter will plug into programming cable and the other end will plug into a DC power supply. The main branch plugs into the light. • Now open the banner pro editor software. Press the connect button. For device type, make sure you have the correct K series light selected. Then select the correct com port based on the com port your PC is assigned to. Once connected the light selection screen should open. In basic mode, you can select what Pin or wire color will turn on which color light or animation. To change settings, simply select from the drop down what color and type of animation you want. Depending on the type of animation you select, you will have the ability to change speed or patterns of the animation. To preview, press the Start button. When you’re satisfied with your selection, press the Write Device Settings button. • If you wish to utilize more than 3 colors, you will want to use advanced mode. This allows you to utilize the 4 pins as a binary selection and get up to 15 different combinations of colors and animations. • Finally, the IO Block mode allows you to utilize this light using only the standard input wires black and white. This type of configuration is useful if you are replacing an existing light that uses only black and white wires, but do not want to change or do not have the ability to change the internal wiring. • Check out the full series at https://www.ramcoi.com/banner/k30-pro... • Buy this and thousands of other products on www.ramcoi.com • LEGAL DISCLAIMER: • While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Ramco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided as is , with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability, and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Ramco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.

#############################

New on site