How to Configure Static IP address for ZTE WIFI Router TechIQ

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=xLanr0J8j1w

How to Configure Static IP address for ZTE WIFI Router || TechIQ • IPADDRESS | INTERNET | broadband | router | Wifirouter | wifi | configuration | wan | ZTE ONT | Nokia • 1. Connect your modem to the WAN port of the router via an Ethernet cable; connect a computer to router’s LAN port via an Ethernet cable. • 2. Log into the router’s web-based management page • 3. Configure WAN Connection Type • 4. On the router’s management page, click Network go to WAN on the left of the web page: • Change the WAN Connection Type to IP ADDRESS • 5. Enter your IP ADDRESS which are provided by your ISP. • 6. Click Save to save your settings, then the router will connect to Internet after a while. • 7. Wait for a few minutes and check the WAN part on the Status page, if it shows any IP address , that means the connection between the Router and the Modem is established. • Follow us on all social media platforms:- • Follow on Youtube :- https://bit.ly/TechIQeducation • Follow on Facebook :- https://bit.ly/facebook-TechIQeducation • Follow on telegram:- https://bit.ly/telegram-TechIQeducation • Follow on Blogger :- https://bit.ly/blogger-TechIQeducation • • If you required special video on any topic then let us know in comment section or Email us. • Email ID: [email protected] • #PPPOE #ONT #ZTEONT #Onus #INTERNET #broadband #router #Wfirouter #wifi #configuration #wan #TechIQ #Networking #troubleshooting #techiqeducation #linux #windows #ubuntu #ipaddress #programming #Watch_Smart_Courses #ccna #ccnp #ccie #developer #free_Courses

#############################

New on site