How To Use the Remote Control Roomba® 800 series iRobot®

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=xTILIkExKZo

In this first of three videos, I will be assembling the Elegoo Smart Robot Car kit. • Robot Car kit provided by Elegoo - https://www.elegoo.com/product/arduin... • Full article at https://dronebotworkshop.com/building... • More articles and tutorials: https://dronebotworkshop.com • Join the conversation on the forum: https://forum.dronebotworkshop.com • Subscribe to the newsletter and stay in touch: https://dronebotworkshop.com/subscribe/ • This is a great kit for beginners and seasoned pros alike, it would also make an ideal project for parents who want to teach their children how to work with electronics. • This robot car kit has the following features: • 4-wheel Arduino-based design • IR Remote Control • Bluetooth Remote Control • Collision Avoidance • Line Following • Rechargeable LiPo batteries • No soldering, drilling, or cutting required • It’s a typical Arduino-based design so even if you aren’t using this specific kit I think you’ll find a lot of useful information for any Arduino robot in this video and the two that follow it. As always there is a corresponding article on the DroneBot Workshop website to help you out. • Because of all of the features of the robot car I’ve decided to split this into three videos and articles. In this video, I will go over the features of the robot car kit and then I’ll show you how to assemble it and give it a quick test. • In the next video, I will show you how to use the IR and Bluetooth remote control. The final video will cover the collision avoidance and line following features. • Here is what will be covered in this first video: • 00:00 - Introduction • 02:29 - Robot Car Kit Unboxing • 07:44 - Elegoo Smart Robot Car features • 09:18 - A look at the individual components • 16:07 - Assembly Introduction • 16:54 - Motor Mounts motors to chassis • 20:53 - L298N Mount • 24:48 - Line Follow Sensor mount • 27:43 - Arduino to top chassis shield • 31:14 - Battery compartment • 33:48 - Servo Motor • 36:09 - Ultrasonic Sensor • 39:47 - Cable wiring • 44:01 - Bluetooth module Tires • 45:07 - Sample Arduino Code • 51:21 - Robot Car Test • This is the first of three videos so stay tuned for the next one. If you haven’t subscribed to the channel yet please do, that way you’ll be informed when the next video is published. And while you are in the subscribing mood please sign up for the DroneBot Workshop Newsletter.

#############################

New on site