Upgrade Your Satellite Dish Setup with Sadoun PowerTech DiSEqC HH Motors

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=xaqt9bCdzf4

This motor is a top choice in its class, featuring a brand new design and an abundance of features. It is suitable for use with most free-to-air offset dishes ranging from 24 to 48 and has the ability to move from east to west in order to track satellites along the Clarke belt, resulting in access to a greater number of channels. • The motor utilizes a data stream passed through the LNB co-axial lead to the mount and only requires a single co-axial cable for installation. • When using the motorized system, power is supplied through the receiver via the coaxial cable that normally runs from the receiver to the LNBF on the dish. To connect the HH Motor, simply disconnect the cable from the LNBF and connect it to the motor, then run a short coaxial cable between the motor and the LNBF. • It is important to turn the receiver off before disconnecting or connecting the coaxial cable to the motor or LNBF. The motor can be controlled using the receiver's remote control, and is compatible with receivers compliant with the DiSEqC 1.2, 1.3, or USALS protocol. • Once the motor has been set up on the satellite arc and the locations of the satellites have been stored, switching between satellites can be done by simply changing the channel. • In addition to adjusting the dish's position from east to west, the motor also adjusts for variations in elevation for each satellite. There is no need to skew the LNBF on a motorized dish, as the motor will tilt the entire dish as it moves. • It is important to note that the HH Motor should only be used with DiSEqC compliant receivers and dishes. Before installation, be sure to carefully read and follow the instructions provided with the motor to ensure proper setup and use. • It is also a good idea to consult a professional or refer to online resources for additional guidance if you are unfamiliar with satellite dish installation or are experiencing any difficulties. • In addition to the HH Motor, you may also need to purchase additional equipment or accessories to complete your satellite dish setup. This may include a satellite finder or satellite lookup tool to help you locate the satellites you wish to receive signals from, a satellite signal meter to fine-tune the dish's angle and ensure a strong signal, and any necessary cables or connectors. • Properly setting up and maintaining your satellite dish and HH Motor will ensure reliable performance and enjoyment of your satellite television service. • https://www.sadoun.com/product-catego... • Here are some keyphrases that could be used for an article about the HH Motor: • HH Motor • Motorized system • Satellite dish installation • Free-to-air offset dishes • Clarke belt • LNB co-axial lead • Co-axial cable • DiSEqC 1.2 • DiSEqC 1.3 • USALS protocol • Satellite arc • Elevation • LNBF • Skew • Receiver • Remote control • Satellite finder • Satellite lookup tool • Satellite signal meter • Cables and connectors • Professional installation • Online resources • Reliable performance • Satellite television service • More information: http://www.Sadoun.com • Follow me on: • Google+: https://plus.google.com/u/0/+sadoun • Twitter: / sadoun • Facebook: / sadoun • Flickr: http://www.flickr.com/photos/sadoun/ • Pnterest: / sadoun • Share Video: • • Subscribe to my channel: • http://www.youtube.com/user/SadounTub... • -------------------

#############################

New on site