Wake On Lan

YOUR LINK HERE:

http://youtube.com/watch?v=xgPtbAA_mz4

Wake On Lan tutorial • Table of Content: • 1. Wake On Lan Requirements 0:01 • 2. Enable wake on lan on your system 0:16 • 3. Config your network card 0:54 • 4. Demo WakeMeOnLan software 1:33 • Twitter: / tipsandtricks39 • Google Plus: https://plus.google.com/b/11743417469... • Facebook: / tips-and-tricks-1593756800872220 • 1. What is Wake On Lan: • Wake-on-LAN (WoL) is an Ethernet or Token ring computer networking standard that allows a computer to be turned on or awakened by a network message. • The message is usually sent by a program executed on another computer on the same local area network. It is also possible to initiate the message from another • network by using subnet directed broadcasts or a WOL gateway service. Equivalent terms include wake on WAN, remote wake-up,power on by LAN, power up by LAN, • resume by LAN, resume on LAN and wake up on LAN. In case the computer being awakened is communicating via Wi-Fi, a supplementary standard called Wake on • Wireless LAN (WoWLAN) must be employed • 2. The MagicPacket: How WoL Works: • WoL-enabled computers essentially wait for a “magic packet” to arrive that includes the NIC’s MAC address in it. These magic packets are sent out by • professional software made for any platform, but can also be sent by routers and internet-based websites. The typical ports used for WoL magic packets are UDP 7 • and 9. Because your computer is actively listening for a packet, some power is feeding your network card which will result in your laptop’s battery draining • faster, so road warriors should take care to turn this off when you need to eke out some extra juice. • Magic packets are usually sent over the entirety of a network and contain the subnet information, network broadcast address, and the MAC address of the target • computer’s network card, whether Ethernet or wireless. The above image shows the results of a packet sniffer tool used on magic packet, which brings into • question exactly how secure they are when used in unsafe networks and over the internet. On a secure network, or for basic home use, there shouldn’t be any • practical reason to worry. Many motherboard manufacturers often implement software along with WoL capabilities to offer hassle-free or largely configuration- • free usage scenarios. • 3. Enabling WoL on Your System: • Most older computers and many modern ones have their WoL settings buried in the BIOS. Depending on your system, you need to hit Escape, F2, or Delete to get • into the BIOS, but if you’re not sure then you should check your system’s documentation. Once you’re in, check under Power Management or Advanced Options or something of that sort. • On this HP computer’s BIOS, the setting is found near the “resume after power failure” option. • Many computer, however, do not have a BIOS option. Fortunately, this doesn’t mean that the capability isn’t there, it just means we need to go through the operating system to enable WoL • Link donate: https://www.paypal.com/paypalme/baphu...

#############################

New on site