How to dismantle and assemble Grundfos SEG AutoAdapt hydraulic 26 40 kW pump

YOUR LINK HERE:

http://youtube.com/watch?v=xlOgtEyTNKU

See how a Grundfos service specialist dismantle and assemble Grundfos SEG AutoAdapt (hydraulic 2.6 - 4.0 kW) pump and find out what the job requires and how it is performed. • The different sections include: • 00:00 Introduction • Dismantling: • 00:12 Lifting the pump • 00:44 Removing the cable • 01:46 Draining of oil • 02:17 Removing the grinder • 03:15 Removing the impeller • 05:10 Removing the shaft seal • 07:16 Removing the shaft with bearings and rotor • 09:06 Removing the bearings • Assembly: • 09:44 Fitting the bearings • 11:33 Fitting the shaft with bearings and rotor • 13:42 Fitting the shaft seal • 17:07 Fitting the impeller • 18:50 Fitting the grinder • 19:57 Filling on oil • 20:49 Fitting the cable • Learn more about SEG pumps, spare parts, service kits and additional services and solutions provided by Grundfos on https://product-selection.grundfos.co... and do not hesitate to contact us via http://www.grundfos.com/pleasecallus. • DISCLAIMER • This service video provides “how to” guidance for Grundfos products and is aimed only at skilled, trained personnel. • N.B. Any stricter local health and safety regulations and requirements take precedence over this guidance. • The video and any information in it is provided on an “as is” basis and without any liability and/or warranty to the extent permitted by applicable law. • Grundfos reviews and updates the information provided on a regular basis. However, instructions may have changed since publication of this video and therefore please always check the latest Service Instructions and the Installation Operating Instructions of the related product. • These documents can be found on https://product-selection.grundfos.co.... • #pumpservice #pumprepair #grundfospumps #grundfosservice

#############################

New on site