How to make Old Concrete look Brand New DIY Concrete Resurfacing

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=xpt9bLKadEk

This video will show you How to Resurface Concrete Steps with Newcrete Concrete Resurfacer product. If you have an old concrete slab or concrete steps, chances are that it looks old, cracked, and worn out. Fortunately, concrete resurfacing products such as Newcrete make it easy to give old concrete a fresh, new look. • To resurface concrete or concrete steps with Newcrete, you will need the following tools and materials 🛠🧰: • Concrete resurfacing product: https://www.ctscement.com/product/new... • Concrete Broom: https://amzn.to/3TWCseh • Concrete Finishing Trowel: https://amzn.to/3i6bHai • Drill with Mixer Attachment: https://amzn.to/3EtTYRD • Sponges (optional): https://amzn.to/3UgZYmJ • Concrete dye (optional): https://amzn.to/3VgF2wO • To resurface concrete or concrete steps with Newcrete, you will want to follow these general steps: • 1. Clean the Existing Concrete Surface. • Before you can resurface concrete, you need to ensure that the existing concrete surface is clean. A “clean” concrete surface is one that is free of any dirt, debris, paint. • 2. Select the Right Concrete Resurfacing Product for Your Application. • I recommend the Rapid Set Newcrete Product. • 3. Mix up the Concrete Resurfacing Product According to the Manufacturer’s Recommendations. • Typically, concrete resurfacing product will be a “pancake batter” consistency once it is mixed up. • 4. Moisten the Existing Concrete Surface Prior to Application of the Resurfacing Product. • Before you apply the mixed up concrete resurfacing product, it is recommened that you moisten the existing concrete surface. • 5. Apply the Concrete Resurfacing Concrete to the Application Area. • To apply the concrete resurfacing product to your existing concrete, it is recommended that you dump out small amounts of the product and the spread it out evenly with a hand trowel. • 6. Apply texture to the concrete surface using a “Broom Finish”. • After applying the concrete resurfacing product to your existing concrete and smoothing it out evenly with a hand trowel, it is generally recommended that you apply a “broom finish” to the concrete surface. • A broom finish provides an aesthetic textured surface that hides any imperfections in the concrete. • 7. Allow the Concrete Resurfacing Product to Fully Cure. • After applying your concrete resurfacing product and applying a broom finish (if desired), simply allow the concrete resurfacing product to cure according to the manufacturer’s recommendations. Typically, these products cure rapidly and are ready for foot traffic in as little as 2-4 hours. • 8. Apply a Concrete Sealer (if desired). • Although a concrete sealer is not required, it can provide a few notable benefits such as: • A sealer will help to prevent staining of the concrete surface and will help to prevent water discoloration. • A sealer can “tint” the surface of the concrete - giving it a darker look. • To apply sealer to concrete, I recommend that you roll the product onto the concrete surface using a foam roller. However, you can also apply sealer using a sprayer. • ----- • For even more detailed information on resurfacing concrete, check out my Blog Linked Here: https://atimprovements.com/how-to-res... • Be sure to subscribe and hit the notification bell so you don't miss any future videos that are part of the Basement Renovation Series! • Follow me on Instagram: / atimprovements • Check out my Blog: Atimprovements.com • Subscribe to my YouTube Channel ⬇️ https://www.youtube.com/c/AndrewThron... • Check out my Website for additional DIY Content: https://atimprovements.com • ▬▬▬▬▬▬▬▬▬▬▬▬▬ • 🎥 MY YOUTUBE GEAR • Camera (Iphone Max): https://amzn.to/3d5HxSo • Microphone (Maono Condenser Mic): https://amzn.to/3RCAb7N • Tripod: https://amzn.to/3Rz5Gj3 • Mini Tripod: https://amzn.to/3Rvt2WM • Lighting: https://amzn.to/3d4QdZ5 • ▬▬▬▬▬▬▬▬▬▬▬▬▬ • 🛠🧰 TOOLS THAT I USE • Carbide Tipped Drill Bit: https://amzn.to/3S0hdIM • Tapcon Screws: https://amzn.to/3OxEWxh • Drill: https://amzn.to/3JICKkk • Tape Measure: https://amzn.to/3HaTWgE • Circular Saw: https://amzn.to/3BFotC4 • Masonry Drill: https://amzn.to/36yP1JW • Level: https://amzn.to/3HowUDn • Hammer: https://amzn.to/35fIpiT • Chalk Line: https://amzn.to/3MwSDg8 • Clamps: https://amzn.to/3HLqwpK • Drill: https://amzn.to/3JICKkk • Sawzall: https://amzn.to/3HcdeSI • Circular Saw: https://amzn.to/3BFotC4 • Jig saw: https://amzn.to/3I6lcyd • Air Compressor: https://amzn.to/34TatJf • Framing Nailer: https://amzn.to/3JGpBYU • Roofing Nailer: https://amzn.to/3BEAuYF • Orbital Sander: https://amzn.to/34UwlUD • Bar Clamps: https://amzn.to/3JjFrJe • ▬▬▬▬▬▬▬▬▬▬▬▬▬ • Thank you so much for watching! • *All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.

#############################

New on site