How To Calibrate Esteps and Flow Rate for Ender 3

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=xyrC0vVNGMs

I'll show you how to calibrate the E-steps and flow rate for an Ender 3 or other FDM 3D printer. I investigate how flow rate actually affects the print's measurements and surface quality. Many people have been suggesting to calibrate flow rate using the single perimeter thickness method, but I found out that it isn't at all a good solution to the problem it's trying to fix. Calibrating E-steps is actually a good way to make the slicer's work more accurate for better printing quality. • • Ender 3 Printable Direct Drive Upgrade: • Ender 3 Printable Direct Drive Upgrade • Ender 3 PTFE Tube Capricorn Upgrade: • Change PTFE Tube for Ender 3 Direct D... • Ender 3 Upgrades Playlist: • Ender 3 Upgrades • • Subscribe to Hard Firm Soft for more 3D printing videos • / @hardfirmsoft • • Twitter: / aleksigron • • Merry Bay by Ghostrifter Official | / ghostrifter-official • Music promoted by https://www.free-stock-music.com • Creative Commons Attribution-ShareAlike 3.0 Unported • https://creativecommons.org/licenses/... • • Idle June by Schematist | http://www.schematistmusic.com • Music promoted by https://www.free-stock-music.com • Creative Commons Attribution 3.0 Unported License • https://creativecommons.org/licenses/...

#############################

New on site