DIY Lego Tray

>> DIRECT DOWNLOAD LINK 🎞️ #1 <<

>> DIRECT DOWNLOAD LINK 🎞️ #2 <<

>> COPY / PASTE LINK PLEASE 🎞️ #3 <<

>> COPY / PASTE LINK PLEASE 🎵 MP3 <<

YOUR LINK HERE:

http://youtube.com/watch?v=yAu3r59_gco

Make your own personalized Lego tray for kid gifts. • Cut list: • Plywood 15in x 15in (you can use 1/2 in or 3/4 in plywood) • 4 - 1x2's cut at approximately 16 3/4 with 45 degree cuts on both sides (wait to cut these until your plywood is cut and cut them to fit exactly one at a time) • Music by https://www.bensound.com • Materials list: • Lego plate (I used the large 15 in one) • 2x4 plywood in 1/2 in • Gorilla Glue • Wood Glue • 2 drawer pulls • 1 - 1x2x6 foot board • 4 - pads (for under the tray) • Stain (ONLY use Minwax, the other I started to use was horrible) • I am not an expert, just a regular woodworker, sharing my experiences with you. This is meant for entertainment purposes only. • Michelle

#############################