Battery Cable Ends How to Change Your Own

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ytNjX_l3V64

Learn how to replace your battery cable ends yourself, and save hundreds. It's so simple a puppy can do it! The video features the LarryB's Battery Cable Repair Kit. Get yours here: • https://bit.ly/2N2rvK2 Are your battery cable ends broken or stretched out, causing a bad connection that makes it tough to get your truck started? • LarryB joins the acclaimed and very handsome mechanic, RockyB, to walk you through the simple process of removing and replacing your battery cable ends. • How To Change Your Battery Cable Ends • Step 1 - Remove the old cable ends. Cable cutters work best, but you can use anything, really. The cleaner the cut, the easier the rest of the process. • Step 2 - Remove the rubber insulation to 1/2 to 1 inch using a box cutter or other knife. • Step 3 - Do the same on the grounds cables. • Step 4 - Slide the ring connector on, and crimp it with a crimper. • Step 5 - Use the LarryB's Battery Cable Crimper for the big cable. It comes in the kit, but you can also find it here: https://bit.ly/2LIHtnF • Step 6 - Put flux on the cable. • Step 7 - Solder the ring connectors. • Step 8 - Install the heat shrink tubing. • Step 9 - Put the clamp on. • Step 10 - Tighten it all up, and you're good to go! • Check out everything we offer for battery cable repair and more: • http://www.larrybs.com/our_products_l...

#############################

New on site