Helpful Tips for Tacking and MIG Welding Fillet Joints MIG Monday

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=zFIdiTJxii4

In this episode of #MIGMonday, we are showing you how to properly tack and weld a fillet joint using the Everlast MIG140. There are many things to consider when welding a fillet. • When tacking, you have to make sure that you don't put too much heat into the metal, because you don't want the work piece distorting before you begin your weld. • You also have to take into account proper torch angle so you get equal fusion on both the top and bottom sides of the joint. Watch this video to get tips and tricks on how to get perfect welds on your fillet joints every time. • • Subscribe to our videos: http://goo.gl/xVmNR • See more TIG welding videos from Weld.com: http://goo.gl/SrmKK • ----------------------------------------------------------------------------- • Weld.com welding videos are a series of welding shows that are loaded with welding tips, tricks and hints that will help you drop that perfect bead every time! Whether you are trying to become better in the areas of TIG Welding, MIG Welding, Stick Welding or Cutting; Weld.com has what you need. All videos are shot from behind the hood so you can get the welders perspective. In addition to showing you how to weld, many times we will show you common mistakes and how to avoid them. • New episodes every Friday! • Check out some of the products we use in our videos: • CK WorldWide Torches: http://goo.gl/sPXPqo • ArcOne Welding Helmets: http://goo.gl/N85Fq0 #welddotcom • Disclaimer: Weld.com is compensated for providing links in our descriptions. However, we only work with companies that we use ourselves and can honestly and ethically recommend to our audience.

#############################

New on site