How to Replace a PCV Valve Toyota Camry

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=zOBWyLBhyq0

*Check out the tools we used below. If the video was helpful, please give it a thumbs up and consider subscribing to the channel.* • This video goes over how to replace a PCV valve on a 2007 Toyota Camry four-cylinder 2.4. This should be the same process for any 2007- 2011 Toyota Camry with a 2.4 motor. PCV stands for (Positive Crankcase Ventilation). A PCV valve controls emissions. Essentially it takes gas produced by the motor and routes it back into the combustion chamber to be burned without harming your vehicle. If the valve doesn’t open and close on schedule or if any part of the system clogs, the result can be rough idle, sluggish acceleration or increased oil consumption. The PCV system allows for cleaner exhaust, prevents blow-by at seals and gaskets and removes crankcase gas generated by the combustion process that would sludge up and destroy the engine if left unchecked. It also allows the engine to perform better, run more efficiently, which produces better fuel economy. For whatever reason, PCV valves are usually overlooked and neglected and really should be part of your normal routine maintenance at least every 50,000 miles. • Tools needed: • Pliers -- -- https://amzn.to/3o4tCz9 • Screw Driver -- -- https://amzn.to/3xJb2OF • Socket Set -- -- https://amzn.to/36IcWn3 • Hand Cleaner -- -- https://amzn.to/3jkXlBk • Rubber Gloves -- -- https://amzn.to/35STq6Q • Shop Towels -- -- https://amzn.to/3y2KwzR • Parts: -- -- https://amzn.to/3OSSKERPCV • These are the tools we used or something that’s similar. There are many manufacturers and various prices. It's a good idea to buy the better tool with the best warranty and easiest exchange in case of tool failure. • • • Disclaimer: • The Auto Teacher assumes no liability for property damage or injury that happens as a result of any of the information contained in this video. Any information learned from this video is to be used at your own risk. The Auto Teacher recommends safety first! Protective gloves, safety glasses and jack stands are highly recommended. These tutorials are made strictly to help people with their car projects and are given to provide factual information we’ve learned over the past 40 years working on cars. We do not guarantee any particular result or any particular warranty. Any injury, loss or damage contained by the viewer while attempting to follow the video’s instructions is solely the viewer’s fault and not The Auto Teacher.

#############################

New on site