Youtor
3D Food Printer Build
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=zP_opPeW8aM
More info and supplies: https://www.drdflo.com/pages/Projects... • Part 1 (syringe pump): • DIY Syringe Pump (Food 3D Printer - P... • Dr. D-Flo wanted to 3D print edibles, but this is more difficult than you think! Clearly, you can't use a normal extruder, so Dr. D-Flo will use a syringe pump to excrete an edible frosting. The resolution of frosting is poor compared to PLA/ABS. Therefore, Dr. D-Flo wanted a large bed size, so he took an X-Carve frame and converted it into a 3D printer. However, the RAMPs Pololu stepper drivers are unable to supply enough current for the X-Carve's power hungry NEMA 23 stepper motors. Like always, Dr. D-Flo over engineered a solution by using SainSmart's 4.2A drivers to receive data from RAMPs and power the stepper motors.
#############################
