Replacing an Igniter Electrode on a Gas Grill

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=zaMJS0vZ_SM

This video from Sears PartsDirect shows how to replace the igniter electrode on a gas grill. The electrode provides the spark to the burner to ignite the gas. If the burner won't light, first clean and align the electrode. If the problem persists, replace it with an igniter electrode that fits your model. • Visit us at: • https://www.searspartsdirect.com?sid=soc:youtube:replacing-an-igniter-electrode-on-a-gas-grill • Or call 1-800-437-1673 to speak with a parts specialist. • The video includes these parts and tools. Look up your model to make sure you get the right parts for your grill. • Igniter electrode • https://www.searspartsdirect.com/part... • Find parts for grill at • https://www.searspartsdirect.com/part... • Or click here to schedule an appointment with a repair technician. • https://www.searshomeservices.com/rep... • Transcript: • The electrode provides the spark to the burner to ignite the gas. If the burner won't light, first clean and align the electrode. If the problem persists, replace it with an igniter electrode that fits your model. Close the shut-off valve on the propane gas tank. Pull off the cooking grate and remove the flame tamer located above the igniter electrode. Remove the igniter mounting screw and push the igniter electrode out of the firebox. Disconnect the igniter electrode wire harness. Remove the igniter electrode. Thread the new igniter electrode through the firebox opening. Line up the hole and install the mounting screw. Plug the igniter electrode wire harness into the igniter module. Place the flame tamer on top of the burner. Reinstall the cooking grate. Open the valve on the propane gas tank.

#############################

New on site