FortiGate IPsec ADVPN with SDWAN and Dual ISPs

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=zkaDwPqZU_k

This tutorial teaches how to configure Auto-Discovery IPsec VPN with SDWAN where each location has two ISP connections. • Contents of this video • 00:00 Introduction • On the Hub • 00:57 Configure SDWAN Zone • 02:10 Customize VPN Tunnels • 03:16 Configure Firewall Policies • 04:17 Configure VPN Tunnel IP Address • 05:02 Configure iBGP • On Spoke 1 • 06:31 Configure SDWAN Zone • 07:45 Customize VPN Tunnels • 08:30 Configure Firewall Policies • 09:28 Configure VPN Tunnel IP Address • On Spoke 2 • 10:15 Configure SDWAN Zone • 11:15 Customize VPN Tunnels • 11:55 Configure Firewall Policies • 12:40 Configure VPN Tunnel IP Address • On Spoke 1 • 13:19 Configure iBGP • On Spoke 2 • 14:35 Configure iBGP • On Hub • 15:58 Configure SDWAN Performance SLAs • 17:28 Configure SDWAN Rules • On Spoke 1 • 18:30 Configure SDWAN Performance SLAs • 19:45 Configure SDWAN Rules • On Spoke 2 • 20:47 Configure SDWAN Performance SLAs • 21:48 Configure SDWAN Rules • On Hub and Spokes • 23:00 Enable ECMP • For information about the setup in VMware Workstation, go to https://drive.google.com/file/d/1V2hg... • In case you are getting the Error '-9999' when changing remote gateway type of an IPsec tunnel, see the following link https://community.fortinet.com/t5/For... • If you have any questions or need further assistance, please feel free to leave a comment below. Don’t forget to subscribe to our channel for more helpful tutorials.

#############################

New on site