How to Install a Fox 40 Float Factory 275 on a SurRon X

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=zkpKKt0CAL8

Installation of a 27.5 Fox 40 Float Factory non-boost fork (2016 model brand new from ebay) on ND's Sur-Ron X. NOTES: The front axle locknut on the RST Killah fork is left hand thread. Turn clockwise to remove. Non-Boost forks do not require front brake rotor spacers. With the newer Boost Fox 40s you will need a 5mm spacer for the rotor. https://www.jensonusa.com/Mrp-Boost-D... Also the newer Fox 40s have shorter stanchions so you need to run a drop upper triple clamp or the lowers will hit the lower crown before bottom out. Fox and Risse Racing make them. Make sure they will fit your specific fork before ordering. Fox 40s have different offsets depending on model. Fox 40 FLOAT maximum air pressure is 120 psi. Set air pressure at 90-95 psi to start. GoPro Hero 5 in 1080 Superview. Head strap mount. Fox DHX2 or Float X2 rear shock install coming soon... • Tools: • --Park Tool CRP-2 ADJUSTABLE CROWN RACE PULLER • --Park Tool CRS-1 CROWN RACE SETTING SYSTEM • --Park Tool TNS-4 DELUXE THREADLESS STAR NUT SETTER • --Park Tool SG-6 THREADLESS SAW GUIDE

#############################

New on site