LML Duramax Finale with Banks Ram Air Install

############################# Video Source: www.youtube.com/watch?v=DX5pMtiG654

2015 LML Duramax finale of the head gasket, cp3 install, and Banks Ram Air cold air intake install. I show how to switch all the sensors, how to mount the brackets, and install all of the clamps and hoses. I also show how the fuel lines are ran to the CP3 after installation with the plug location. Then finally you will get to hear it run. The truck needs to be tuned as there is a little fuel knock coming from some of the injectors but that is to be expected with this install/conversion. • TORQUE SPECS: • Exhaust bolts: 28 ft lbs • Exhaust Pipes: 39 ft lbs • Injector lines: 30 ft lbs • Glow Plugs: 13 ft lbs • Glow Plug Nuts: 11 ft lbs • Injector bracket bolts: 37 ft lbs • Rocker arm shaft: 30 ft lbs • Thermostat housing and all water pipes: 18 ft lbs • Intake bolts/nuts: 15 ft lbs • Valve Cover Bolts Upper and Lower: 71 Inch lbs • Screamin' Diesel CP3 Conversion Kit: https://www.sdptwins.com/exergy-sport... • Head Gasket Kit with ARP Studs: https://www.sdptwins.com/lml-head-gas... • Banks Ram Air Intake: https://bankspower.com/products/cold-... • Instagram: / 0p_0verhaul

#############################

New on site