What To Do With Electrical Grounding in A 1950s Home

############################# Video Source: www.youtube.com/watch?v=J5rtDn4bZYg

Today's question was, I have a 1950's home, what do I do about grounding? • • First, you'd need to determine what kind of wiring and grounding you've got. A quick check you can do is look at the outlets - are they 2-prong or 3-prong? If they're 2-prong, they are not grounded. • It's really important to note that while you could replace the outlet, you might not actually be grounded. To be properly grounded, you need to have a ground wire that runs to the branch circuit to the panel, then to a branch rod. • While you can retrofit a ground into an older house, proper grounding needs to be done throughout the house. As you might imagine, this can get a little costly. • Article 210.8 of the National Electric Code On House Electrical Grounding states that you cannot have half of the house with grounds and the other half without a proper ground. In this instance, you MUST install GFI outlets. Comparatively, GFI's are much less costly when compared to rewiring the entire house. These outlets cost around $30 each and can • Interested in learning more, or scheduling a time for us to resolve your grounding issues? • Give Peterson Electric a call at 970.599.1872 or visit our website at https://petersonelectricllc.com

#############################

New on site