Professional Bumper Repair System Video 4 Repair Dented Plastic Bumper

############################# Video Source: www.youtube.com/watch?v=gdnZ5B-mjmk

Learn more at http://appliedcolors.com/shop/bumperp... • TRANSCRIPT: • Voice: Attention automotive appearance professionals. In this video you will learn to take plastic bumper damage like this... • • • Voice: And make it look like this... • • Voice: Using the BumperPro Professional Bumper Repair System • • Voice: Locate and remove all clips and hardware. Give the bumper a gentle tug to separate it from the vehicle. • • Voice: Place the bumper on an A-frame or a table. Heat the outside with a heat gun, and from the inside, push the dent outward. You will want to wear thick gloves to avoid burning your hands. Feel for low spots with your palm. To push out the bumper in smaller areas of the bumper use tools like a clip puller, screw driver, or a sanding block. • • Voice: When we look closely, we can see that the paint his bumper was cracked. and will need to be re repainted. • Voice: Sand all cracked areas with your electric sander and 80 grit sandpaper • Voice: Sand the filler with 220 grit sandpaper wrapped in a foam block if you have one available. • Voice: Apply 2-3 coats of primer with no wait time between coats. Wait 10 -15 minutes and wet sand with 600 grit sandpaper. we were working in a 45 degree shop and used an infrared lamp to accelerate the primer drying time. • • Voice: After re-attaching the bumper, we sanded with 220 grit, applied primer, applied base coat, and applied clear coat to get the result you see here. • Mask off surrounding areas. Clean with wax and grease remover. Wipe with one wet cloth, then follow with a clean cloth. • Before spraying base coat, remove dust by wiping gently with a tack rag. • Apply base coat in multiple light coats. • I got some splatter on the bumper. I checked my spray gun and found a loose nut, which I point at here. • I used a heat gun to speed up the drying of the base coat because of it was in the 40s on this day. • Unfortunately, the video of me applying the clear coat was lost, but you can see in this photo that we got an excellent result and a happy customer who avoided purchasing an entirely new bumper.

#############################

New on site