dodge challenger oil change

############################# Video Source: www.youtube.com/watch?v=kdd2NDX2Abc

How to do an Oil Change on a 2014 #Dodge Challenger SRT 392 - #Moparbro fred_eazy21 walking you through! • Mopar no Car! • Performing an oil change on a Dodge Challenger is a routine maintenance task that helps keep the engine running smoothly. Here's a general guide on how to do it: • Materials Needed: • Oil filter • Engine oil (refer to your owner's manual for the recommended oil type and quantity) • Oil drain pan • Socket wrench set • Oil filter wrench • Funnel • Oil filter drain tool (optional but helpful) • Rag or paper towels • Steps: • Prepare Your Vehicle: • Park your Dodge Challenger on a level surface. • Make sure the engine is cool before you begin. • Gather Materials: • Collect all the materials listed above. • Locate the Oil Drain Plug and Oil Filter: • The oil drain plug is usually located on the bottom of the engine oil pan. • The oil filter is typically located near the bottom of the engine. • Drain the Oil: • Place the oil drain pan underneath the oil drain plug. • Using a socket wrench, loosen the oil drain plug in a counterclockwise direction. • Once it's loose, remove the plug carefully by hand and allow the old oil to drain completely into the oil drain pan. • Replace the Oil Filter: • Use an oil filter wrench to loosen the old oil filter by turning it counterclockwise. • Once loose, remove the old oil filter carefully. Be prepared for some oil spillage. • Before installing the new oil filter, apply a thin layer of clean oil to the rubber gasket on the new filter. This helps create a good seal. • Install the new oil filter by turning it clockwise until it's snug. Do not over-tighten. • Add New Oil: • Refer to your owner's manual for the correct type and amount of oil needed for your Dodge Challenger. • Use a funnel to pour the new oil into the engine oil filler hole. • After adding the oil, replace the oil filler cap securely. • Check Oil Level: • Start the engine and let it run for a minute or two. • Turn off the engine and wait a few minutes for the oil to settle. • Check the oil level using the dipstick. Add more oil if necessary to bring it to the correct level. • Dispose of Old Oil Properly: • Transfer the old oil from the drain pan into a suitable container for recycling or disposal at an authorized facility. • Clean Up: • Wipe any spilled oil from the engine and surrounding areas using a rag or paper towels. • Record Maintenance: • Keep track of the date and mileage of the oil change for future reference. • Following these steps will help you successfully perform an oil change on your Dodge Challenger. Make sure to follow safety precautions and dispose of the old oil properly. If you're unsure or uncomfortable performing this maintenance yourself, it's always a good idea to consult a professional mechanic.

#############################

New on site