youtor.org
#############################
Video Source: www.youtube.com/watch?v=vt3WtAxmfzM
How to Apply a Natural Finish on Softwoods: • Examples: Pine, Cedar, Poplar, etc. • How to apply this finish: • 1. Sand the project up through the grits until at least 220-grit • a. It is a good idea to sand pieces that will be hard to reach before assembly. • 2. Wipe the project with mineral spirits to check for glue splotches • 3. Apply a sealer coat (Zinsser Sealcoat) of a shellac-based finish by wiping: flooding the surface with finish and wiping it off. • 4. If you have any nail holes, cracks or defects in the wood, fill them now with a wood filler putty that matches the color of the oiled wood (sand smooth) • 5. Apply at least two coats of a wipe-on polyurethane • 6. Optional: After the finish has cured for 72 hours, apply a coat of high-quality paste wax and then polish it off. • Supply Checklist: • Sandpaper: 80-grit through 220grit (320- and 400-grit recommended) • https://www.rockler.com/3m-no-slip-gr... • Mineral Spirits • https://www.rockler.com/klean-strip-o... • Synthetic Finishing Pads • https://www.rockler.com/synthetic-fin... • Wonderfill Wood Filler • https://www.rockler.com/wunderfil-woo... • Zinsser Sealcoat • https://www.rockler.com/zinsser-bulls... • Urethane Top Coat • https://www.rockler.com/general-finis... • Liberon Wax • https://www.rockler.com/liberon-black... • Shop towels or clean rags • Subscribe to this channel for more of the latest woodworking how-to videos and new product innovations. Click the red subscribe button at: / rocklerwoodworking • Find the best woodworking products and innovations at: http://www.rockler.com/
#############################
New on site
