Netgear Router Configuration Easy Steps NETGEAR SUPPORT

############################# Video Source: www.youtube.com/watch?v=xc2O6Z-qlSo

Netgear Router Configuration | Easy Steps | NETGEAR SUPPORT • In this video we've shown that how you can configure your netgear router easily. • First go to : http://www.routerlogin.net • Your NETGEAR admin login credentials are: • Username: admin • Password: password • ----------------------------------------------------------------- • • • The information in this article applies if you configuring a cable internet connection with a NETGEAR router that uses the Smart Wizard user interface. • If you have a router with a NETGEAR genie user interface, see How to configure your NETGEAR router for cable internet connection with NETGEAR genie • If you have a DSL internet connection, see one of the following articles: • If your router uses the NETGEAR genie user interface, see How to configure a NETGEAR DSL Gateway for internet connection with NETGEAR genie • If your router uses the old Smart Wizard user interface, see How to configure a NETGEAR DSL gateway for internet connection with Smart Wizard • To configure your router for cable internet connection with Smart Wizard: • Connect your modem to the internet port of the NETGEAR router and your computer to any of the four LAN ports. • Switch the computer, router, and broadband/cable modem, off and on again. Wait for them all to finish booting up. • Open a web browser and type the router's IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Enter. • You are prompted to log into the router. • The default username is admin and the default password is password. • The username and password are case-sensitive. • If the default username and password is not working, you might have changed the password. Please try other passwords that you might have changed to. Otherwise, a factory reset is needed to restore the router to factory defaults. To perform a factory reset, see Restoring a NETGEAR home router to the factory default settings. • Click Setup Wizard. • The Setup Wizard screen displays. • Select Yes and click Next. • • The Setup Wizard detects the type of internet connection. For cable internet connections, the Setup Wizard detects Dynamic IP. • Click Next. The router saves the settings. • Note: Do not change the default settings unless your internet service provider gave you specific DNS information that must be configured. • • (Optional) To check if you are connected to the internet, select Router Status under Maintenance. • Look at the IP Address field to see if you have a valid IP address (that is, not blank or filled with zeroes, such as 0.0.0.0). • For more details refer to: • https://goo.gl/3WGqb4 • ---------------------------------------------------------------- • • Video tags: • Netgear (Business Operation), Router (Computer Peripheral Class), Netgear DG834, Computer Configuration, Software (Industry), Microsoft Windows (Operating System), Windows 8 Editions (Software)

#############################

New on site