Making Dovetails With Just Two Tools Take two

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=3NqgAncOCo8

Now that the computer has been rebuilt we are going to try this again. Today we are making basic dovetails with just a hacksaw and chisel. more tools might make it easier, but they are not needed! we will be doing this live and in real-time. come see me mess up and have a fun time. • Wood By Wright Store: https://www.woodbywright.com/shop • Tools I recommend: https://www.woodbywright.com/tool-sug... • Antique tool sources: www.handtoolfinder.com • 00:00:00 James Wright: What are we going to do today? • 07:00 ZAG Studios: Are you eyeballing where to space the cuts? • 12:00 A2woodArt: Not about dovetails, but wonder if James thought of any way of making “bandsaw boxes” using just hand tools? • 14:00 things that inspire me: what are the bare essentials I need to relief carve a stock (crossbow)? • 15:00 DrKahnihoochima: Would one large tail be enough for an arbitrary project, or would you always use at least two? • 19:00 Hansenomics: Cut nails or dovetails for joinery for a traditional tool chest? • 22:00 Duane Roen: When you first started making dovetail joints, what mistakes did you make? • 26:00 CJ. Teague: Why not use the other board as a square? • 33:00 Frank: What is the best species to practice on? Is pine just too soft? • 40:00 ZAG Studios: not about dovetails, but how do you determine how long the lifespan of a handsaw or panel saw has? • 41:00 Duane Roen: Do you ever make multiple saw cuts in the waste area to make the chisel work easier? • 42:00 Peter DeWitt: Do you have any advice for load-bearing joints: e.g., rabbet vs dovetail for the bottom of a cabinet? • 43:00 A2woodArt: glue or not to glue dovetail joint? • 45:00 Jack Rector: What is the advantage of dovetails versus finger joints? • 47:00 Warren Munn: Have you done any video's on putting solid timber edge banding with interior and exterior joints. (working with plywood and hiding the ply) • 51:00 Luis Fernando Carrion-Gonzalez: What's the difference/thickness between fret saw vs coping saw? using for removing waste for dovetailing. • 52:00 Harold Golden: Any future videos planned that would show how to scribe logs or roundwood to make saddle joints? • 54:00 Victor C.: With my Stanley number 4 plane. When I retract the blade the lever cap sometimes moves up with the blade and chip breaker. Is that because I don't have enough pressure on the lever cap? • 56:00 Duane Roen: What is your preferred marking knife for marking dovetails?

#############################

New on site