DAPLINK Debugger Board

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=8heSqCubNG0

Arm Mbed DAPLink is an open-source software project that enables programming and debugging application software running on Arm Cortex CPUs. Commonly referred to as interface firmware, DAPLink runs on a secondary MCU that is attached to the SWD or JTAG port of the application MCU. This configuration is found on nearly all development boards. Enumerating as a USB composite device, it creates a bridge between your development computer and the CPU debug access port. • LuatOS has been ported to Air32F103CBT6 based on ARM official code. It is adapted for a 216 MHz main frequency and 96 KB of large RAM resources, enabling faster download speeds (firmware is open source). Additionally, a compact DAPLink hardware has been designed for this platform. • Features : • 1. Debugging and programming for the entire range of Arm Cortex core chips, with ongoing support from ARM officials for future core updates. • 2. Full-featured USB-to-Serial conversion (CDC) with hardware DTR and RTS, enabling automatic download functionality. • 3. Drag-and-drop programming via USB flash drive, allowing direct burning of hex or bin files to the device (limited to CBT6). • 4. Adapted for DAPLink V2 WINUSB version, offering 3 to 10 times faster download speeds compared to the HID version, significantly reducing download time. • 5. Support for WEBUSB functionality, enabling firmware programming through a web interface with insert pop-ups for user guidance, eliminating concerns about usability. • 6. Compatibility with various debugging environments such as Keil, IAR, PyOCD, and more. • Application : • Debugging and programming for a wide range of Arm Cortex core chips • Specifications : • Voltage: 3.3 volts • 216 MHz frequency • RAM memory: 96 KB • #analyzer • #programmer • #debugger • #DAPLINK • ........................................ • Product Code: SQ12292 • ........................................

#############################

New on site