How to Make a Shot Put Ring CHEAP Under 100

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ADSJ2l_6ups

This is how I made a cheap shot put ring for under $100. • Materials (you can buy on Amazon or at local hardware store) • 4x8 Plywood • Jigsaw • Liquid Nails • Caulk Gun • 1” Screws • Drill • Measuring Tape • Quick Tutorial • 1. Buy Materials • 2. Cut 1 Sheet of Plywood into 8 Segments Each 1 Foot Long • 3. Cut Segments to make Toeboard Arc • 4. Glue/Screw 6-7 Segments for Toeboard (depends on thickness of plywood) • 5. Glue/Screw 1 Segment for Back of the Ring • Additional Suggestions • 1. Buy Plywood with a Thickness of more than 1/2 inch, but less than 3/4 inch • 2. Use 1 Inch Screws for First Layer of Toeboard, but 1.25 Inch Screws for Rest • 3. Alternate Positions of Screws Every Layer • 4. Sand All Edges of Plywood • 5. Paint Toeboard • I had most of the tools already so it actually only cost me about $60. • Follow @throwrightfarhappens on instagram and twitter... • 📸 / throwrightf. . • 🐦 / throwright • #ShotPutRing #Cheap #Toeboard

#############################

New on site