HowTo setup your Yaesu FT991A for the FT8 data mode and WSJTX

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=CltsWx03UIo

#ft991a #wsjt-x #hamradio • The FT-991A (https://amzn.to/31kWZDR) has over 140 menu options. In this short video I'll cover all the menu options of the FT-991A you need to set to get up and running for WSJT-X and FT8. • Thanks for watching! 73, de W0KNI. • Turn on radio before connecting to your computer! • FT8 Settings for FT-991A: • 31 CAT RATE 9600 • 32 CAT TOT 100ms • 33 CAT RTS DISABLE ** • 62 DATA MODE OTHERS • 64 OTHER DISP 1500Hz • 65 OTHER SHIFT 1500Hz • 66 DATA LCUT FEQ OFF • 68 DATA HCUT FEQ OFF • 70 DATA IN SELECT REAR • 71 DATA PTT SELECT DAKY • 72 DATA PORT SELECT USB • Mode: DATA-USB • In FUNCTION SCREEN (F/M-LIST) • NOTCH OFF • CONT OFF • DNR OFF • DNF OFF • SHIFT 0Hz • WIDTH 2400-3000Hz • DT GAIN 6-20 (Check ALC meter) • OSX Time Sync !! Run this in terminal window • sudo sntp -sS time.apple.com • Computer audio: • FT-991A NOW handled via USB cable! • WSJT-X Settings: • Rig: Yaesu FT-991A • Serial Port: Make sure and select the correct port for your interface! • Baud Rate: 9600 • Data Bits: Eight • Stop Bits: Two • Handshake: None • PTT Method: CAT

#############################

New on site