ELGA PURELAB Flex Installation Ready to Use from the Box

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Cv57dcbMMRQ

ELGA PURELAB Flex Installation: Ready to Use from the Box • Remove the unit carefully from the packaging • Insert the handset into the credle • Locate the water inlet connection at the bottom of the unit • Press blakc ring with thumbnail and remove transit plug • Push supplied tube firmly into the connector until it stops • Connect the other side of the tube to the water supply and turn on water • Check for any leaks • Connect the power cable firstly to the unit and then into the supply • Switch on the power supply • The screen will then turn on and display different languages • Use the scroll buttons to select your language • Then press’ accept’ • The screen will then ask if you ‘want to fit a Purification Pack?’ • Press ‘accept’ button again to start the process of fitting in the Purification Pack • Open the right hand side door • Remove Bypass pack by pushing down and out at the top of the pack • Remove the two caps on bath ends of the purification pack and insert • Close the door • Place 5 liter container under the dispense point • Press ‘accept’ • The unit will dispense 5 liters of water • Your PURELAB Flex is new ready to use • Supplied to you behind the dispenser holder is a handy quick reference guide. • To help us reduce our carbon footprint, please recycle all cardboard from the packaging once installed. • https://www.elgalabwater.com/

#############################

New on site