4ft x 8ft foldable workbench with wheels full build

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=EUZnDb4WA7M

This video shows you how to build a large 4x8 rolling workbench with folding legs and a smooth polyurethane surface. All the steps, parts and tools are included. Wood cuts are at the bottom of the description. And this puppy is heavy and solid so don't let it fall on you when assembling. BTW, 2x4s are not really 2in x 4in. • Total Material Cost: $260 - not including my time and tools • Parts: • 1 sheet 4x8 3/4 cabinet - quality plywood • 13 8ft 2x4s • 4 caster wheels - rated 250lb • 1 box 2.5in wood screws - T25 bit usually included • 4 bolts - 5/16 x 5in • 4 bolts - 5/16 x 4in • 8 5/16in washers • 4 5/16in lock washers • 4 wingnuts 5/16in • 16oz bottle of wood glue • 4 hinges - 2.5in • Minwax glossy polyurethane • 60 grit sandpaper for rounding leg pivot points • 220 grit sandpaper for sanding surface after first polyurethane coating • 5 or 6 paintbrushes • old shirt to wear when applying polyurethane • Tools: • tape measure • carpenter's triangle • pencil • compound miter saw - 10in • circular saw - 8in • 2 clamps • hand held sander • drill • 1/16in drill bit • 1/4in drill bit • 5/16in drill bit • drill bit block - optional • patience • Wood cuts: • 4x8 plywood is full length - trim 1in from all corners • 2 frame inner braces lengthwise - 39in - 04:21 in video • 2 frame inner braces side-to-side - 39in - 04:21 in video • 4 legs - each made from 2 2x4s - glued and screwed together. - 33 1/4in • 2 leg braces - 39in • 2 leg stops - 42in • 2 frame end pieces - 39in • 2 frame side pieces - 84in • 1 leg stabilizer - 81in • 2 leg bottom pieces for caster wheels - 39in • 1 side piece to support plywood when folded - 30in

#############################

New on site