VW Can Bus Hacking With SavvyCan amp Cantact Voltlog 342

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=GOuglqFtmOE

High quality PCB Services https://pcbway.com In this video I’m gonna walk you through the process that I use for hacking a VW cluster CAN bus(PQ35 platform, MFA cluster). The tools that I’m going to be using today are very accessible price wise and open source on top of that. As hardware I’m going to be using the Cantact usb to can bus adapter, this is going to allow a computer and operating system to access and communicate on the CAN BUS. As software I’m going to be using Savvycan which is once again an open source GUI tool for hacking and reverse engineering CAN BUS data. Links for places where you can order the Cantact hardware and download Savvycan will be placed in the description below. • →Cantact USB-CAN Adapter • CANdo clone https://voltlog.com/y/bwh3u • CANable clone https://voltlog.com/y/ojgqk • →VW PQ35 harness with gateway https://voltlog.com/y/8g5sa • →Cantact wiki https://voltlog.com/y/raos7 • →Candlelight firmware wiki https://voltlog.com/y/j82ze • →Candlelight firmware binary (8b2b2b4.bin) https://voltlog.com/y/iq29k • →SavvyCan github https://voltlog.com/y/dols2 • →SavvyCan release binary https://voltlog.com/y/jki3g • →VirtualBox https://voltlog.com/y/mdle0 • →Commands used in the video • #install dfu-util using this command • sudo apt install dfu-util • #flash new firmware using this command • sudo dfu-util --dfuse-address -d 0483:df11 -c 1 -i 0 -a 0 -s 0x08000000 -D gsusb_cantact_8b2b2b4.bin • #check gs_usb kernel module is enabled • sudo modprobe gs_usb • #check available can interfaces • sudo ip link show • #configure can0 for desired speed • sudo ip link set can0 type can bitrate 500000 • #bring up can0 • sudo ip link set up can0 • #check can0 • sudo ip -det link show can0 • →Support the channel via Patreon, Paypal or Bitcoin • http://www.voltlog.com/donations • →Blog Post • http://www.voltlog.com/ • #VoltLog #CAN #VW

#############################

New on site