EcoStruxure Machine Expert Training M42 Getting started with Structured Text ST

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Kx8EiyZ51Rc

EcoStruxure Machine Expert Training - M4.2 Getting started with Structured Text ST • The software to program the Modicon M241, M251, M258, M262 and PacDrive MotionController is EcoStruxure Machine Expert (former SoMachine / SoMachine Motion). • For the Modicon M258 the version required to use the software is the EcoStruxure Machine Expert v1.2.x. • The version of EcoStruxure Machine Expert v2.x does not include the M258 in the hardware list. • In order to install this software you need to download Schneider Electric Software Installer from the next link: • https://download.schneider-electric.c... • Then you should be able to install EcoStruxure Machine Expert. • The software EcoStruxure Machine Expert has a Free version after the 42 days trial, please check pages 14 and 16 for more information for the free version limitations: • https://download.schneider-electric.c... • The user that wants to use this software needs to have an account in our License Portal in order to register the software: • https://www.se.com/ww/sites/corporate... • In the past the software was SoMachine and the latest version of this software was the SoMachine V4.3 SP2. • The reference for SoMachine is the SOMNACS43: • https://www.se.com/ww/en/product/SOMN... • The firmware version of the Modicon M241, M251 and M258 for PLC programmed in SoMachine starts in v4.x.x.x and in Machine expert it starts in v5.x.x.x. • In order to program the Modicon M241, M251, M258, M262 you can use a miniUSB cable (TCSXCNAMUM3P or BMXXCAUSBH018) , SD Card (not M258 this one use pen drive) or an ethernet cable (depend on the version).

#############################

New on site