How to Paint a Vehicle Accessory

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=N60TW6qtSHw

How to Paint a Vehicle Accessory • Preparing the Painting Surface • 1) Check color with the Test Card. • 2) Clean and remove the accessory from the vehicle. • 3) Assess the damage. • 4) Dry sand the accessory to remove gouges and scratches. • 5) For deep scratches, use the Putty to fill imperfections. Let the Putty dry. • 6) Wet sand the dried putty to smooth out the surface. • *TIP: Before painting, make sure to wet sand the entire accessory.This will help the paint adhere to the surface. • Preparing Your Accessory For Painting • 1) Clean and dry the accessory. • 2) Use Wax and Grease Remover Wipe to remove grease and oil. Move the Wipe in one direction over the damaged area. • 3) Remove any dust or fine particles by wiping the Tack Cloth lightly on the surface. • Let’s Paint! • 1) Clean and prepare the accessory for Primer application. • 2) Lightly apply the Primer with a short spurt motion. Apply 2-3 coats. Let dry in between coats. • *TIP: Always use the Tack Cloth after each coat dries. • If the Primer is uneven, wet sand the coat with a finer grit. • 3) Prepare the accessory for Colorcoat application. • 4) Apply 2-3 coats 6-8 inches away from surface. • 5) Allow each coat of Colorcoat to dry 10-15 minutes. • 6) Clean with Tack Cloth and prepare for Clearcoat application. • 7) Apply two coats of Clearcoat. • 8) Let the Clearcoat dry and put the part back on the vehicle. • Have a great touch up! • At TouchUpDirect, we have a perfect match for OEM quality touch up paint for your vehicle! • Find your color and TouchUp Combo kit: • https://touchupdirect.com/ • Instagram: / touchupdirect • Facebook: / touchupdirect • Twitter: / touchupdirect

#############################

New on site