How to Install a License Plate Bracket on a BMW

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=SoQ_38S8Kx0

How to install a license plate bracket on a BMW E90. This car originally came from the US and unfortunately, it is law to have one in Canada. #bmw #howto #bmwe90 • BMW E90 PN - 51-11-7-143-749-BOE • Amazon affiliated links for heat set threaded inserts: • US: https://amzn.to/3XSDE6v • Canada: https://amzn.to/4gUaPiC • First, start by washing the vehicle and, if you wish, waxing behind this bracket. • Install the bracket and align the bracket tabs with the notches at the bottom of the bumper. Then use a drill to mark the holes. • Then drill the holes. • I modified the bracket slightly, I installed heated threaded brass inserts. The holes were drilled out larger and then the inserts were installed with a soldering iron. • Finally, the bracket is installed with stainless steel screws. • Then the license plate is installed with socket head fasteners, I’ll eventually switch these out to stainless steel. • Website: http://4diyers.com • Patreon: / 4diyers • Facebook: / 4diyers • Twitter: / 4diyers • Instagram: / 4diyers • Tumblr: / 4diyers • Pintrest: / 4diyers • Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week! • © 4DIYers 2013 • All Rights Reserved • No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.

#############################

New on site