Introduction to Lithography with Simon Burder

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=TkY2PzAn51A

Robert Dunt, Founder of ‪@ArtTop10‬ attends a lithography course with renowned printer Simon Burder who explains everything about this printing process which uses limestone. You can see how to prepare the stones, how to draw on them and how to print from them. • Find out more on Simon's website - http://www.oaksfineart.co.uk/index_si... • The Tate website on lithography - A printing process based on the fact that grease and water don’t mix. The image is applied to a grained surface (traditionally stone but now usually aluminium) using a greasy medium: such as a special greasy ink – called tusche, crayon, pencils, lacquer, or synthetic materials. Photochemical or transfer processes can also be used. A solution of gum arabic and nitric acid is then applied over the surface, producing water-receptive non-printing areas and grease-receptive image areas. The printing surface is kept wet, so that a roller charged with oil-based ink can be rolled over the surface, and ink will only stick to the grease-receptive image area. Paper is then placed against the surface and the plate is run through a press. • Lithography was invented in the late eighteenth century, initially using Bavarian limestone as the printing surface. Its invention made it possible to print a much wider range of marks and areas of tone than possible with earlier printmaking relief or intaglio methods. It also made colour printing easier: areas of different colours can be applied to separate stones and overprinted onto the same sheet. • Offset lithography involves printing the image onto an intermediate surface before the final sheet. The process is ‘offset’ because the plate does not come in direct contact with the paper, which preserves the quality of the plate. With offset lithography, the image is reversed twice, and appears on the final sheet the same way round as on the stone or plate.

#############################

New on site