Bearing Packer

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=bZaE0v1WeIg

Bearing Packer - 52-370 // View this Product on kimballmidwest.com: http://bit.ly/2WjG90l • ****MADE IN THE U.S.A.**** • Features: • • QUICK EASY • Quickly removes old grease and easily repacks bearings with fresh grease. • • SAFER IN USE • No need to pre-clean bearings, eliminating the hazards associated with solvent exposure. • • CLEAN EFFICIENT • Grease stays in the tool, eliminating the mess of packing bearings by hand. • • VERSATILE • Accommodates bearings up to 3-1/2 O.D. • • INSTRUCTIONS • 1) Load the bearing packer using the grease fitting attached to the top of the piston, or manually load using bulk grease. Be sure to leave room at the top for the piston and to allow the dust cover to be attached for storage. • 2) Place the bearing, with the taper side down, over the stem of the piston. Place the piston cap onto the piston. • 3) Press down on the cap until the new grease shows on the top of the bearing and all of the old grease has been forced out. • • NOTE: Always store with the dust cover in place when not in use. The bearing packer can be compressed in a vise if very heavy grease is used.

#############################

New on site