The Engineers Process Of Troubleshooting Your CNC Robot

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=kwCDaXzKnaY

This video covers the process used to troubleshoot CNC robotics. This video is long, and is required to be. If you're serious about learning your robot, and how to detect issues with it this video is essential. • Just a heads up. This is the exact process I go over with my clients. • If you have questions, or require quotes please message me direct at [email protected] or through my eBay store here. https://www.ebay.com/str/edealersdirect • Please do your own research before making any purchase for production robotic components. When in doubt ask, and I highly recommend messaging a vendor to test their response time. • Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds. • Here's a link to my Ethernet Smooth Stepper turnkey package https://www.ebay.com/itm/133064380079 • Here's a link to my UC-400 Ethernet Turnkey Controller package https://www.ebay.com/itm/144862296429 • CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors • https://www.ebay.com/itm/133300288430 • CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors • https://www.ebay.com/itm/143498883290 • CNC 3-18/4 Double Shielded Pre-Built Motor Cable GX-16 Filtered Connectors • https://www.ebay.com/itm/144280353346 • CNC 18/4 Double Shielded Pre-Built Motor Cable GX-16 Filtered Panel Connector • https://www.ebay.com/itm/144279518155 • CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) https://www.ebay.com/itm/143650166809 • CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, Filter https://www.ebay.com/itm/134192466153 • CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM) • https://www.ebay.com/itm/134194961658 • Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) https://www.ebay.com/itm/132532331429 • This is my DS Flexion (Ultra Flex) cable. • CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw https://www.ebay.com/itm/133891676093 • CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw https://www.ebay.com/itm/133891673596 • CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw • https://www.ebay.com/itm/132649829362 • This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used) • CNC VFD Cable 10ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/142538105021 • CNC VFD Cable 15ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/133273996534 • • CNC VFD Cable 20ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/131899174942 • CNC VFD Cable 30ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/133273998565 • • Here's my 22/2 double shielded accessory cable. • CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection) • https://www.ebay.com/itm/145089695270 • CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection) • https://www.ebay.com/itm/145089698308 • CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection) • https://www.ebay.com/itm/145089706227 • • Here's links to the GX-16 prewired connectors discussed in the video. • CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads EMI Filters https://www.ebay.com/itm/144276695477 • • #PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology

#############################

New on site