FYSETC Install TMC2209 on S6 v12 board

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=qfK-GZ0UPWk

This vedio shows you how to install TMC2209 for S6 board. • FYSETC S6: • Based on STM32F446 180Mhz，all IOs can withstand 5V voltage • 6 TMC stepper drivers support, no need wire Uart/SPI • Improved TMC jumper settings ，simpler and easier to understand • Main power reverse protection circuit，safer 28V input max，12V@5A，5V@2ADC-DC circuit，[email protected] LDO • Two car fuses for hot bed input and main power input • Limit switch socket 24V/5V/3.3V optional, ready for more other equipment, such as inductive sensor, BL-Touch • XH connector and MX connector are optional • 3pin temperature header, you can use thermistor or thermocouple (requires AD597 module) • 3 ways PWM fans ，2 ways RGB led ，12V 24V optional • EXP1 EXP2 have more multiplexing functions, such as USART, I2C, CAN • SD card USB upload support • Github: • https://github.com/FYSETC/FYSETC-S6 • Shop: • FYSETC S6: https://www.aliexpress.com/item/40003... • TMC2209: https://www.aliexpress.com/item/33027...

#############################

New on site