youtor.org
The Secret To Stop Burning Out Plasma Cutter Tips
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=zvuEeGVwBd8
The secret to stop burning out plasma cutter tips is very simple .If you are anything like me when I first started plasma cutting with my cheap cut 50 plasma cutter I would try and cut the thickest metal I could find just to see if it would work? But there is an art to using a plasma cutting machine you don't just want to dive in and start cutting without knowing a little about how the machine works especially the consumables because you can burn out your tips and electrodes very fast if you don't hold your plasma torch on the correct angle. My torch is a pt-31 that runs very cheap consumables but you can still be spending a lot more money than needed if you don't do it right. So if you are wanting to cut thick steel never try and blow a hole straight down through it always start on an angle or better still start by drilling a hole to start cutting from. Checkout my channel for more plasma cutter troubleshooting tips. • My amazon links and reviews of machines below • If your in the market for a great plasma cutter Checkout my best plasma cutter choices that I have reviewed . • Flame Weld 50 amp Plasma Cutter Review : • Pilot ARC Plasma Cutter Review - Unde... • Flameweld 50 Amp Machine : https://amzn.to/3D7MSCR • Bestaec Machine : https://amzn.to/3Vzw270 • PLC 55 pro Machine : https://amzn.to/3CLfL6g • PLC 55P Pro Pilot Arc Plasma Cutter (CNC capable) Review : / zx5ixu96ga
#############################
